ACTi Outdoor Ready Box on Vertical Pole with Accessory Set - Manual (Page 9)

www.acti.com
Installation Guide
9
Step 5: Connect the Ethernet Cable
1. Connect the Ethernet cable to the Ethernet port of the camera.
If connecting other cables, such as an external power adaptor, DI/DO or serial devices,
connect the supplied terminal blocks and connect them to the corresponding connectors of
the camera ( see Appendices on page 13 for more information). Sample image below.
2. When done, close the back cover by tightening the three (3) screws.
Memory Card Slot
Audio In /Out Jacks
12V Power Connector
Serial Connector
Digital Input / Output
(DI/DO) Connector