ACTi Outdoor Ready Box on Vertical Pole with Accessory Set - Manual (Page 3)

www.acti.com
Installation Guide
3
Installation Procedures
This section provides step-by-step procedures in installing the camera on a vertical pole using
the accessory set (SMAX-0091) and how to waterproof the cables.
Before installation, prepare the following tools and accessories which are not included in the
camera package thus must be purchased separately:

Pole Mount with Mounting Bracket (SMAX-0091)

Flexible Conduit (Trade size = 1/2 ”)

Ethernet Cable

Screwdriver
Step 1: Attach the Pole Mount Kit
1. Using a screwdriver, turn the screw head of the wire strap counter-clockwise continuously
until the two ends are detached.
2. Insert the wire strap through the strap holes of the pole mount.