Step 4: prepare the flex conduit – ACTi Outdoor Ready Box on Vertical Pole with Accessory Set User Manual
Page 6
Installation Guide
Step 4: Prepare the Flex Conduit
1.
From the network side, insert the Ethernet cable and other cables (if any) through the flex
conduit.
NOTE:
To connect an external power adaptor, digital input/output (DI/DO) or serial devices,
insert the cables without connectors through the flex conduit and as well as audio
input/output device cables at this point.
2.
Insert the flex conduit with Ethernet cable through the pole mount. Pull enough length to
connect the cable to the camera.
3.
Insert the clamping nut through the flex conduit.
This manual is related to the following products: