ACTi Bullet Camera (E44~E46) on Tilted Wall with Integrated Bracket - Manual (Page 5)

www.acti.com
Installation Guide
5
Indoor Installation Procedures
If the camera will be installed indoors and there is no need to waterproof the cable connections,
follow the procedures below.
Step 1: Prepare for Installation
1. Attach the bracket to the camera.
2. Determine how the cables will be routed:

If the cables will pass through the wall , mark the cable hole location on the wall as
shown on the drill template.

If the cables will be routed along the wall :
a. Note that the cable should pass through the cable gap on the bracket.