ACTi Bullet Camera (E44~E46) on Tilted Wall with Integrated Bracket - Manual (Page 15)

www.acti.com
Installation Guide
15
Outdoor Installation Procedures with
Flex Conduit
The camera network cable is already waterproof, therefore only the Ethernet cable on the
network side needs conduit cabling solutions. Use the bundled conduit gland and flexible conduit
with 1/2” size for this installation. The flexible conduit is not included in the package.
Step 1: Prepare for Installation
1. Attach the bracket to the camera.
2. Determine how the cables will be routed:

If the cables will pass through the wall , mark the cable hole location on the wall as
shown on the drill template.

If the cables will be routed along the wall :
a. Note that the cable should pass through the cable gap on the bracket.