Step 2: attach the tilted mount – ACTi Outdoor Hemispheric / Fisheye Dome on Corner with Tilted Mount (PMAX-0310) User Manual
Page 4
Installation Guide
3.
Attach eight (8) screws (not included in the package) to secure the Corner Mount to the wall.
NOTE:
Purchase screws applicable to the wall type you are mounting the Corner Mount to.
Step 2: Attach the Tilted Mount
Attach the two (2) screws (included in the Corner Mount package) to install the tilted mount onto
the corner mount.
IMPORTANT!
Note that the tilted mount must be installed with the pre-cut cable hole facing up.
This manual is related to the following products: