ACTi Outdoor Hemispheric / Fisheye Dome on Corner with Tilted Mount (PMAX-0310) User Manual
Page 16
Installation Guide
3.
Connect the wire with the white stripe to the
12V
pin and the other to the
GND
pin.
4.
Tighten the screws of the
12V
pin and the
GND
pins to secure the wire connection.
5.
Set the prepared power adaptor for connection later. Below is an example of a power adaptor
with an attached terminal block.
NOTE:
The power adaptor is not bundled in the package.
This manual is related to the following products: