Waterproof solution with conduit, Installation guide, 9waterproof solution with conduit – ACTi Outdoor Dome on Vertical Pole with Accessory Sets User Manual
Page 9
Installation Guide
Waterproof Solution with Conduit
This section describes the procedures to waterproof the cabling connections using the bundled
conduit gland and flexible conduit. This is the recommended when an exterior-grade Ethernet
cable is not available or if other input/output devices or an external power adapter will be
connected to the camera (select models only).
1.
Prepare the following materials for waterproof installation:
Conduit Gland
(included in the camera package)
For use with 3/8” flexible conduit
For use with 1/2” flexible conduit
Flexible Conduit
3/8” or 1/2" Trade size
(not included in the package)
Network Cable
CAT 5 or CAT 6
(not included in the package)
NOTE:
The bundled conduit gland may vary.
Check the conduit gland that came with your
package to determine if 3/8” or 1/2" is the
suitable flexible conduit size.
2.
Disassemble the bundled conduit gland as shown below:
NOTE:
In this installation, the conduit gland body can be securely attached to the mount kit;
therefore the use of lock nut is not necessary. Please set the lock nut aside.
Lock Nut
Body
Sealing Insert
Clamping Nut
or