Step 3: install the heavy duty mount, Optional: add extension tube(s), E 11 – ACTi Outdoor Dome on Vertical Pole with Accessory Sets User Manual
Page 11
Installation Guide
Step 3: Install the Heavy Duty Mount
1.
Route the network cable or flexible conduit through the conduit hole of the Pole Mount.
Using Flex Conduit
Using Naked Cable
2.
Insert the flex conduit or network cable through the Heavy Duty Mount.
Using Flex Conduit
Using Naked Cable
3.
Attach the Heavy Duty Mount on the wall using the four (4) bolts (included in the Pole Mount
package).
Optional: Add Extension Tube(s)
If the Heavy Duty Mount is not long enough, add one extension tube (purchased separately). See
on page 48.
or
This manual is related to the following products: