ACTi Outdoor Dome on Vertical Pole with Accessory Sets - Manual (Page 26)

www.acti.com
Installation Guide
26
Step 3: Install the Gooseneck
1. Route the flex conduit or network cable through the conduit hole of the Pole Mount.
Using Flex Conduit Using Naked Cable
2. Insert the flex conduit through the Gooseneck.
Using Flex Conduit Using Naked Cable
3. Attach the Gooseneck onto the wall using the four (4) screws (included in the Pole Mount
package).
Optional: Add Extension Tube(s)
If the Gooseneck is not long enough, add one extension tube (purchased separately).
See Installing Extension Tubes on page 48.
or