Pole mount with gooseneck installation procedures, Step 1: attach the pole mount, Pole mount with – ACTi Outdoor Dome on Vertical Pole with Accessory Sets User Manual
Page 20: Gooseneck
Installation Guide
Pole Mount with Gooseneck Installation
Procedures
Use this solution to install the camera on a vertical pole using a Gooseneck.
Step 1: Attach the Pole Mount
1.
Using a screwdriver, turn the screw head of the wire strap counter-clockwise continuously
until the two ends are detached.
2.
Insert the wire strap through the strap holes of the pole mount.
3.
Do the same to the other wire strap. The pole mount should look like the illustration below.
This manual is related to the following products: