Step 6: install the camera to the mount kit – ACTi Outdoor Dome on Vertical Pole with Accessory Sets User Manual
Page 31
Installation Guide
5.
Pull the network cable and other cables (if any) through the bottom conduit hole.
Step 6: Install the Camera to the Mount Kit
1.
If necessary, insert a micro SHDC card (up to 32 GB) into the card slot of the camera.
2.
Align the camera screw holes and the conduit hole to the corresponding holes on the mount
kit and attach the three (3) supplied screws (included in the mount kit package) to secure the
camera.
NOTE:
There are several screw packs included in the mount kit package, select the screw
pack applicable to the camera model.
This manual is related to the following products: