ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 41)

www.acti.com
Installation Guide
41
Step 5: Route the Cable Through the Junction Box and
Wall Mount
1. Without connecting the cable/conduit gland parts, pull enough length of the network cable
(and other cables, such as power or input/output device, if any).
2. Insert the cable through the Junction Box.
Using the Cable Gland Using the Conduit Gland
3. Route the cable through the Wall Mount and out through the hole marked below. Make sure
to leave enough length of cable to connect to the camera later.
NOTE: When using the naked cable with the cable gland solution, be sure to pull enough
length of the cable to connect to the camera later. Once the clamping nut is tightened, the
cable cannot be pulled anymore.
or