Step 5: install the camera to the wall mount – ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 User Manual
Page 29
Installation Guide
Step 5: Install the Camera to the Wall Mount
1.
Insert the network cable and other cables (if any) through the bottom cable hole of the
camera.
2.
Align the camera screw holes and the cable hole to the corresponding holes on the Wall
Mount and attach the three (3) supplied screws (included in the Wall Mount package) to
secure the camera.
NOTE:
There are at least 2 different types of screws included in the Wall Mount package,
select the screw type applicable to the camera model.
CAUTION:
When using electric screwdrivers,
be careful not to touch the internal
camera components while attaching the screws. Since electric screwdrivers vary in sizes,
speed, and force, they may bruise and damage the internal camera components.
DISCLAIMER:
ACTi will
not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.