ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 - Manual (Page 30)

www.acti.com
Installation Guide
30
Step 6: Connect the Cable(s)
1. For camera models that support external power adaptor, audio in/out, or digital input/output
(DI/DO) functions, attach the bundled connectors. Below is an example of connecting the
power adaptor terminal connector. Otherwise, skip to the next step.
NOTE: For more information on connecting these cables, please refer to the camera model
hardware manual downloadable from the website ( www.acti.com ).
2. Connect the network cable to the Ethernet port of the camera.
NOTE: For models with other connectors (e.g. power adaptor, DI/DO, etc.), connect the
cables to their corresponding connectors. Sample image below.
For more information on connecting these cables, please refer to the camera model
hardware manual downloadable from the website ( www.acti.com ).
Digital Input / Output
(DI/DO) Connector
12V Power Connector
Audio Input / Output
Connector