Step 4: install the wall mount – ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 User Manual

Page 14

background image

Installation Guide

Step 4: Install the Wall Mount

1.

Align the back plate to the Wall Mount and push the excess cable through the hole on the

wall.

Cable Gland Solution

Conduit Gland Solution

2.

Secure the Wall Mount to the wall using four (4) screws (purchased separately).

NOTE:

Make sure to purchase screws applicable to the wall material where the wall mount is

to be installed.

or

This manual is related to the following products:

Outdoor Dome (B8xI8x) on Straight Wall with Wall Mount Outdoor Dome (E89) on Straight Wall with Wall Mount Outdoor Dome (B8xI8x) on Straight Wall with Accessory Sets of PMAX-0314 Outdoor Dome (E89) on Straight Wall with Accessory Sets of PMAX-0314 Outdoor Dome on Straight Wall with Wall Mount