Waterproof solution with conduit, Installation guide, 10 waterproof solution with conduit – ACTi Outdoor Dome on Straight Wall with Accessory Sets of PMAX-0314 User Manual
Page 10
Installation Guide
Waterproof Solution with Conduit
This section describes the procedures to waterproof the cabling connections using the bundled
conduit gland and flexible conduit. This is the recommended solution when an exterior-grade
Ethernet cable is not available or if other input/output devices or an external power adapter will be
connected to the camera (select models only).
1.
Prepare the following materials for waterproof installation:
Conduit Gland
(included in the camera
package)
Flexible Conduit
1/2" Trade size
(not included in the package)
Network Cable
CAT 5 or CAT 6
(not included in the package)
For use with 1/2” flexible
conduit
2.
Disassemble the bundled conduit gland as shown below:
NOTE:
In this installation, the conduit gland body can be securely attached to the back plate ;
therefore the use of lock nut is not necessary. Please set the lock nut aside.
3.
Attach the gland body to the cable hole of the back plate.
Lock Nut
Body
Sealing Insert
Clamping Nut