ACTi V31 - Manual (Page 8)

www.acti.com
Encoder Hardware Manual
8
Physical Description
V31 Overview
Item Description
1 Power LED Lights up when the device is powered on.
2 Serial Communication 1
Activity LED
Lights up to when a serial device is connected
to the RS-422/RS-485 Port 1 .
3 Serial Communication 2
Activity LED
Lights up to when a serial device is connected
to the RS-422/RS-485 Port 2 .
4 Video Input LEDs
(1~8)
The LED lights up when an analog camera is
connected to its corresponding video input
connector.
5 Memory Card Slot Insert a memory card (not included) into the
slot for local recording purposes.
NOTE: Supports microSDHC and microSDXC
cards. Card not included in the package.
6 Video Input Connectors
(1~8)
Connects an analog camera through BNC
connection. See Connecting the Analog
Camera on page 15 for more information.
NOTE: Video cable with BNC connector not
included in the package.
7 Reset Button Use to restore the factory default settings,
including the administrator’s password. To
reset the encoder, press and hold the Reset
button using a pointed object (e.g. pen), for 5
seconds or until the Power LED goes off.