ACTi B41 User Manual
Page 37
Hardware Manual
3.
Connect the wire with the white stripe to the
12V
pin and the other to the
GND
pin.
NOTE:
The terminal block pictures are for reference only, note that actual label placement
may vary per model.
4.
Tighten the screws of the
12V
pin and the
GND
pins to secure the wire connection.
5.
Set the prepared power adapter for connection later. Below is an example of a power adapter
with an attached terminal block.
NOTE:
The power adapter is not bundled in the package.
This manual is related to the following products: