ACTi B41 - Manual (Page 15)

www.acti.com
Hardware Manual
15
Step 3: Install the Camera
1. If the “pigtail” will pass through the wall , follow Waterproof Solution Using the “Pigtail”
on page 18 first and then route the cable through the wall.
If the “pigtail” will go along the wall , route the cable through one of the cable gaps on the
bracket.
2. Install the camera to the wall using four (4) screws applicable for the wall material (purchased
separately).
NOTE: Make sure the wall can bear more than the weight of the camera with bracket.
Step 4: Waterproof and Connect the Network Cable
See Waterproof Solution Using the “Pigtail” on page 18.