Inverting and mirroring the image, Selecting the input signal setting, 18 inverting and mirroring the image – Epson POWERLITE CINEMA 200 User Manual

Page 18

Inverting and Mirroring the Image

If the image is displayed upside-down or backward, select the correct Projection option:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu, then open the

Screen

menu, and then select

Projection

3. Choose from these options:

■

Front

if the projector is located in front of the

screen (for example, on a table).

■

Front/Ceiling

if the projector is located in front

of the screen and mounted overhead.

■

Rear

if the projector is located behind the screen.

■

Rear/Ceiling

if the projector is located behind

the screen and mounted overhead.

Selecting the Input Signal Setting

If you’re using the projector’s Input A port, select the correct setting for the type of video
equipment you’ve connected to it:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu, then open the

Input Signal

menu, and then select

Input A

3. Choose from these options:

■

YCbCr

for a video player that outputs an NTSC signal.

■

YPbPr

for a video player that outputs an HDTV signal.

■

RGB-Video

if your video player outputs an RGB video signal.

Note: Check the label next to the port on your video equipment, if you’re unsure which setting
to use.

button

navigation

buttons