Westermo RM-80 - Manual (Page 33)

33 6193-4201
6. Set Computer name as something…
7. Select a COM port
8. Select who can access this connection
9. Click Finish
10. Select properties of this new connection by right clicking on connection.
11. General Tab click on Configure button
12. Ensure maximum speed is 38400bps, click OK
13. Select Networking Tab -> click on Internet Protocol (TCP/IP) in list box and then
click Properties button.
14. On Properties form click Advanced button
15. On Advanced TCP/IP Settings form->General Tab, uncheck field in PPP link stating
“Use IP header compression”.
16. Configuration is now complete. Click on this newly created link to establish a con-
nection to RM-80.
17. Ensure both the username and the password are entered exactly as configured in
RM-80. (When booted in SETUP mode, the PPP server has username “user” and pass-
word “user”.)