Westermo Lynx 100 - Manual (Page 10)

10 6640-2205
Ethernet SFP pluggable connections (FX or TX)
Electrical specification
IEEE std 802.3. 2005 Edition
Data rate 100 Mbit/s, 1000 Mbit/s manual or auto
Duplex Full or half, manual or auto
Transmission range Depending on tranceiver
Connection FX connectors:LC
Copper connectors (CX) can not be used in combination
with FRNT
Shielded cable Not required
Conductive housing Isolated to all other circuits
Number of ports 1 or 2
Status relay
Contact resistance
Max 30 Ω
Isolation to All other
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm 2 (AWG 24 – 12)
Maximum voltage / current 60 VDC / 80 mA