Westermo EDW-100 - Manual (Page 25)

25 6616-2203
LED indicators, also
integrated in the RJ-45
connector.
(for details see next page)
S2 DIP-switch
Termination
(for details see page 25)
S1 DIP-switch under lid
(for details see page 25)
Ethernet 1
RJ-45 connection
(for details see next page)
Connections
Power connection
screw terminal
RS-232 (DTE)
* Direction relative this unit
RS-422/485 interface
screw terminal
The EDW-100 supports redundant power
connection. The positive input are +VA and
+VB, the negative input for both supplies are
COM. The power is drawn from the input
with the highest voltage.
4-position Direction* Description
No. 1 In R+
line RS-422
No. 2 In R–
line RS-422
No. 3 In/Out T+
line RS-422/485
No. 4 In/Out T–
line RS-422/485
4-position Description
No. 1 Common
No. 2 +VA
No. 3 +VB
No. 4 Common
9-position Direction Description
No. 1 N/C Not connected (DCD)
No. 2 In Received Data (RD)
No. 3 Out Transmitted Data (TD)
No. 4 Out Data Terminal Ready
(DTR)
No. 5 – Signal Ground (SG)
No. 6 In Data Set Ready (DSR)
No. 7 Out Request To Send (RTS)
No. 8 In Clear To Send (CTS)
No. 9 N/C Not connected (RI)