Westermo EDW-100 - Manual (Page 13)

13 6616-2203
Termination and fail-safe of the RS-422/485 serial
interface can only be made by DIP-switches only.
The local IP address of the unit can be configured by
using a terminal program.
New Connection - Hyper Terminal
File
'EDW-100 IP CONFIGURATION'
Firmware : 4100-9002
-- Current IP configuration --
Local IP address : 169.254.100.100
Gateway address : 169.254.100.1
Subnet Mask address : 255.255.255.0
Press to select the value shown in braces,
or enter a new value.
Local IP address [169.254.100.100]?
Edit View Call Transfer
Connected 0:01:33 VT100 9600 8-N-1 NUM SCROLL CAPS Capture Print echo
Help
Unique features
… Packing algorithm that enables the user to decide how and when the serial data
should be encapsulated in a TCP or UDP data frame and sent out on the network.
… Galvanic isolation, this feature eliminate communication errors. One of the most
common errors is caused by potential differences between interconnected equipment.
… Redundant power supply with wide input range.
These features along with the high EMC immunity enable the device to be used in
projects where a high degree of reliability is required.