Westermo RFI-xx - Manual (Page 5)

5 6641-22305
Agency approvals and standards compliance
Westermo
article number
Denomi nation
Approval / compliance
EMC SAFETY EX MARINE
3641-3110 rFi-10 … … … …
3641-3100 rFi-18 … … … …
3641-3200 rFi-14-F4G … … … …
3641-3210 rFi-6-F4G … … … …
3641-3300 rFi-18-F4G-T4G … … … …
3641-3310 rFi-10-F4G-T4G … … … …
3641-3420 rFi-18-F16 … …
3641-3410 rFi-10-F8 … …
3641-3400 rFi-18-F8 … …
3641-3320 rFi-18-F4G-T4G-F8 … …
3641-3220 rFi-14-F4G-F8 … …
eMC eN 55024, information technology equipment – immunity characteristics Limits and methods
of measurement
eN 55022, information technology equipment – radio disturbance characteristics – Limits
and methods of measurement
eN 61000-6-2, electromagnetic compatibility – immunity for industrial environments
eN 61000-6-4, electromagnetic compatibility – emission for industrial environments
eN 50121-4, railway applications – electromagnetic compatibility – emission and immunity
of the signalling and telecommunications apparatus"
FCC Part 15 Class A
sAFeTY UL/ieC/eN 60950-1, iT equipment
eX eN 60079-0, eN 60079-15 and eN 60079-31
MAriNe DNV – standard for Certification No. 2.4, April 2006
FCC Part 15.105
Notice: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
EN 55022
Notice: This is a class A product. in a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Corrosive
environment
Notice:
This product has been successfully tested in a corrosion test according to
IEC 60068-2-60, method 3. This means that the product meets the requirements
to be placed in an environment classified as ISA-S71.04 class G3.
Note! if the product is placed in a corrosive environment, it is important that all
un-used connector sockets are protected with a suitable plug in order to avoid
corrosion attacks on the gold plated pins in connectors.