Westermo RFI-xx - Manual (Page 12)

12 6641-22305
Type tests and environmental conditions
Phenomena Test Description Test levels
esD eN 61000-4-2 enclosure contact ± 6 kV
enclosure air ± 8 kV
rF field AM modulated ieC 61000-4-3 enclosure 20 V/m 80% AM (1 kHz), 80 – 2700 MHz
Fast transient eN 61000-4-4 signal ports ± 2 kV
Power ports ± 2 kV
surge eN 61000-4-5 signal ports unbalanced ± 2 kV line to earth, ± 2 kV line to line
signal ports balanced ± 2 kV line to earth, ± 1 kV line to line
Power ports ± 2 kV line to earth, ± 1 kV line to line
rF conducted eN 61000-4-6 signal ports 10 V 80% AM (1 kHz), 0.15 – 80 MHz
Power ports 10 V 80% AM (1 kHz), 0.15 – 80 MHz
Power frequency
magnetic field eN 61000-4-8 enclosure Not susceptible to magnetic fields
Pulse magnetic field eN 61000-4-9 enclosure 300 A/m
Voltage dips
and interruption eN 61000-4-29 DC power ports 10 & 100 ms, interruption
10 ms, 30% reduction
10 ms, 60% reduction
+20% above & –20% below rated voltage
radiated emission eN 55022 enclosure Class A
FCC part 15 enclosure Class A
Conducted emission eN 55022 DC power ports
Telecommunication
ports Class B Class B
Dielectric strength eN 60950 signal port to other
isolated ports 1.5 kVrms 50 Hz 1 min
Power port to other
isolated ports 1.5 kVrms 50 Hz 1 min
Temperature Operating –40 to +70ºC (–40 to +158ºF) (all models*)
storage & Transport –40 to +85ºC (–40 to +185ºF) (all models)
Maximum surface
temperature 135°C (temperature class T4)
Humidity Operating 5 to 95% relative humidity
storage & Transport 5 to 95% relative humidity
Altitude Operating 2 000 m / 70 kPa
service life Operating 10 year
Vibration ieC 60068-2-6 Operating 7.5 mm, 5 – 8 Hz
2 g, 8 – 500 Hz
(Wall-mounted or DiN-rail mounted using TH
35-15 according to eN 60175)
shock ieC 60068-2-27 Operating 15 g, 11 ms
(Wall-mounter or DiN-rail mounted using TH
35-15 according to eN 60175)
enclosure UL 94 Aluminium / Zink Flammability class V-0 (all models)
* Note: rFi10-F4G-T4G and rFi18-F4G-T4G needs forced airflow to handle operating temperature above +60°C. This
can be acheived using an external fan or similar. Without forced airflow maximum operating temperature is +60°C.
refer also to "safety" section.