Westermo FDV-206-1D-1S - Manual (Page 8)

8 6660-2201
Interface specifications
Power
Rated voltage
24 to 48 VDC
Operating voltage 19 to 60 VDC
Rated current 460 mA @ 24 VDC
220 mA @ 48 VDC
Rated frequency DC
Inrush current, I 2 t 1 mA²s @ 24 VDC
3 mA²s @ 48 VDC
Startup current* 760 mApeak @ 24 VDC
500 mApeak @ 48 VDC
Polarity Reverse polarity protected
Redundant power input Yes
Isolation to All other
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm² (AWG 24 – 12)
Shielded cable Not required
* With fully loaded USB port. External supply current capability for proper startup
RS-232
Electrical specification
EIA RS-232
Data rate 300 bit/s – 115.2 kbit/s
Data format 7 or 8 data bits, Odd, even or none parity, 1 or 2 stop bits
Protocol Transparent, optimised by packing algorithm
Circuit type SELV
Transmission range 15 m / 49 ft
Isolation to Power, DSL, Ethernet
Galvanic connection to USB, Console
Connection RJ-45*
Shielded cable Not required
Conductive housing Yes
Number of ports 1
* RJ-45 to RS-232 converter cable included.