Welltech LP-389 HTTP - Manual (Page 17)

Released Version 1.0 16
Step 6. Setting your LP389 SYSLOG configuration.
Enter your LP389 web browser. Select the left function “Device Setting” at “Debug” to set.
(1) SYSLOG : Select the “Enable” button to open the SYSLOG function.
(2) Check for start from Any Time : When You choose this function, the syslog message will be sent
out to pre-configured address immediately. If you want to receive Syslog messages at a certain
period of time, simply disable this selection.
(3) Syslog Start (YYYY/MM/DD HH:MM) : Syslog message start to send out date and time.
(4) Syslog Stop (YYYY/MM/DD HH:MM) : Syslog message stop to send out date and time.
(5) Syslog Server : Enter your TFTP server address.
(6) Syslog Port : Syslog default port is 514.
Press to complete syslog setting.