Welltech LP-389 HTTP - Manual (Page 15)

Released Version 1.0 14
Mode 2: SYSLOG
You can use TFTP as your SYSLOG server and refer to the following steps to create your SYSLOG
server.
Step 1. Check your IP Phone network address.
Step 2. Set up IP address of your computer which you are going to monitor debug messages. Both
the computer network address and IP Phone address should stay at the same subnet.
Step 3. Press “TFTP.exe”
Step 4. Press the setting button.
The IP address in Server interfaces field is your computer network address and syslog server
address.