Welltech LP-389 v.1.06 Administrator Guide User Manual
Page 25
Parameter Description:
z
Name: User name for the phone entry. This name will be used for name
dialing features which support English only.
z
Tel No: Telephone number to be dialed. The following formats were
supported.
-
tel no: the telephone number will be dialed by using SIP line 1
or first defined line. An example is “12345”
-
tel_no@@siplineid: You can specified an dedicate SIP line for
dialing. An example is “12345@@2”. LP389 will use sip line 2
for dialing out.
-
tel_no@IP: You can defined to call a pure IP to IP calling. An
example is “[email protected]:5060”. The call will be send
to IP 192.168.23.1 and port 5060.
z
Ring Tone: The specified ring tone will be used when the incoming
caller ID is matched the phone book.
Dialing Plan > ANI Black List
It is a black list for incoming caller. If the incoming caller ID is in the list, the call will be
reject automatically.
Parameter Description:
z
Tel No: Caller ID to be rejected.
Dialing Plan > Hot Line
The hot line feature can be used when you want to call to a specified number after user
pickup the phone automatically.
25