Welltech LP-389 v.1.06 Administrator Guide User Manual
Page 10

Parameter Description:
z
Administrator: The administrator level user which has full access of
LP389.
z
Supervisor: The supervisor level user which has limited administrative
access right.
z
User: The user access right which only allows to setting some user
related features.
z
User ID: Login User ID
z
Password: Login Password
z
Confirm Password: Confirm new password again
z
Language: The web page language used when the account login. To add
a customized local language, please contact Welltech.
Debug Settings:
LP389 provides the real time debug to syslog or telnet interface. It generates the debug
information based on debug level and modules. Since the generating debug will
consume system resource, it is recommended to turn on only for necessary and under
Welltech FAE’s instruction.
Device Setting > Debug
Parameter Description:
z
SYSLOG: Enable or disable to send system information to SYSLOGD
server or not
z
Check for start from Any Time: Always Send: Always send syslog or only
during a specified time range.
z
Syslog Start(YYYY/MM/DD HH:MM): Always Send: Always send syslog
or only during a specified time range.
z
Syslog Stop(YYYY/MM/DD HH:MM): The syslog stop sending time.
z
SyslogD Server: SyslogD server IP address
10