Welltech LP-389 v.1.06 Administrator Guide - Manual (Page 11)

z Syslog Port: syslog server service port (default is 514)
Auto Provisioning:
The LP389 can be provisioned by WellEMS 9510 for large deployment.
Device Setting > Provisioning
Parameter Description:
z Provisioning Service: Enable auto provisioning service by WellEMS 9510
or not.
- Enable: Enable the service and use manual configured EMS server
parameters.
- Disable: Disable the auto provisioning service.
- Discovery: To automatically discover the EMS server or not. By using
this mode, WellEMS 9510 need to be the same IP network in order to
make the IP broadcasting work.
z EMS Discovery Port: WellEMS 9510 service auto discovery broadcasting
port (default is 61005).
z EMS summary refresh interval: How long the LP389 will report its
summary status to WellEMS 9510 in seconds.
z EMS IP address: The WellEMS 9510 server IP address
z EMS Server Port: The WellEMS 9510 Server port
z Data Encrypt: WellEMS 9510 encryption data for security
- Enable provisioning data encryption or not
11