Sat settings – Wavecom W74PC V8.7.0 User Manual

Page 53

WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V8.7.0

First start



Pressing Change Order will reverse the polarity of the signal and pressing Default ST will restore the de-
fault value.

By right-clicking on the display a menu appears.

SAT Settings…

For the SAT Modes, additional parameters can be set in the Options | SAT Settings dialog box.

These settings are:

 Service: Select the service to monitor. Choose between:

FAX/DATA/TEL/HSD/TELX_SM/TELX_MM. There are two different possibilities for monitoring
telex:

This manual is related to the following products: