Watson-Marlow PF6 - Manual (Page 22)

INSTRUCTION HANDBOOK
PF6
PF6 IH EN 74-105-022 v1.04.doc Version: 1.04 Page 22 of 30
Function 47 – Printer set-up
Function 47 tells the system which protocol to use when transmitting to connected printer.
When this function is activated, it will first require the operator to enter the transmission velocity
(baudrate).
One of the following values must be chosen:
75 300 2000
110 600 2400
134 1200 4800
150 1800 9600
Subsequently PF6 will ask the operator to enter a protocol number (controlword).
There is a choice between the following protocols:
1 = 7 data bits 1 stop bit no parity
2 = 7 data bits 1 stop bit even parity
3 = 7 data bits 1 stop bit odd parity
4 = 7 data bits 2 stop bits no parity
5 = 7 data bits 2 stop bits even parity
6 = 7 data bits 2 stop bits odd parity
7 = 8 data bits 1 stop bit no parity
8 = 8 data bits 1 stop bit even parity
9 = 8 data bits 1 stop bit odd parity
10 = 8 data bits 2 stop bits no parity
11 = 8 data bits 2 stop bits even parity
12 = 8 data bits 2 stop bits odd parity
It is not possible to set the system to transmit at any other rates or formats.
Function 72 – Volume format
Value: An integer number.
Volume format for “function 1”.
The function makes it possible to change volume format between 1: volume (ml) and 2: weight (g).