Watson-Marlow Bredel 40 - Manual (Page 8)

GENERAL
8
1 GENERAL
1.1 How to use this manual
This manual is intended as a reference book by means
of which qualified users are able to install, commission
and maintain the hose pumps mentioned on the front
cover.
1.2 Original instructions
The original instructions for this manual have been
written in English. Other language versions of this
manual are a translation of the original instructions.
1.3 Other supplied documentation
Documentation of components such as motors and
inverters is normally not included in this manual.
However, if additional documentation is supplied, you
must follow the instructions in this additional
documentation.
1.4 Service and support
For information with respect to specific adjustments,
installation, maintenance or repair jobs which fall
beyond the scope of this manual, contact your Bredel
representative. Make sure you have the following data
at hand:
•
Serial number hose pump
•
Article number pump hose
•
Article number gearbox
•
Article number electric motor
•
Article number frequency controller
You will find these data on the identification plates or
stickers of the pumphead, the pump hose, the gearbox
and the electric motor. Refer to §
4.1.1 .