Watson-Marlow Bredel 40 - Manual (Page 26)

MAINTENANCE
26
7 MAINTENANCE
7.1 General
7.2 Maintenance and periodic inspections
The following maintenance scheme shows the
maintenance and periodic inspections that need to be
carried out on the hose pump to guarantee an optimal
safety, operation and life of the pump.
WARNING
Only use original Bredel parts when main-
taining the hose pump. Bredel cannot
guarantee a correct functioning and any
consequential damage that occurs from
the use of non-original Bredel components.
See also chapters
2 and 3 .
WARNING
If the cover is removed when the pump
hose is still in the pump head, the com-
pression forces on the pump hose may
cause deformation of the pump housing.
The hose needs to be safely removed
before the cover can be replaced.
Normally the compression forces are par-
tially compensated by the cover.