VXL Instruments Itona TC61yy Series - Manual (Page 8)

Removing the Side Cover and Bezel 4
3
Removing the Side Cover and Bezel
The procedure to remove the side cover and front bezel of the client is explained in this section.
To remove the and side cover:
1. Using the star screwdriver (Item B in Figure 1) unscrew the 2 screws as shown in Figure
4
Figure 4: Side Cover Screws
Note: Retain the screws for future use.
2. Slide the side cover and remove it as shown in Figure 5.
Figure 5: Removing Side Cover
3. Press the locks at the side of the bezel, hold the lock and remove the bezel as shown in
Figure 6.