beautypg.com

Replacing ram – VXL Instruments Itona TC61yy Series User Manual

Page 14

background image

Replacing RAM

10

6

Replacing RAM

To replace RAM:

1. Remove the power adapter and side cover . For more information see Removing the Side Cover

on page 4.

2. Apply isopropyl alcohol on the glue holding the RAM, pull the glue out using the nose pliers.

Figure 15: RAM Socket Clips

3. Remove the existing RAM from the socket by unlocking the holders and pulling it

outwards.

Figure 16: RAM Slot

This manual is related to the following products: