VXL Instruments Itona TC61yy Series - Manual (Page 12)

Replacing SATA Hard Disk 8
5
Replacing SATA Hard Disk
To replace SATA hard disk:
1. Remove the power adapter and side cover . For more information see Removing the Side Cover
on page 4.
2. Using the star screwdriver ( Item B in Figure 1) unscrew the HDD bracket screws as shown in
Figure 11 and Figure 12 .
Figure 11: SATA Hard Drive Side Bracket Screws
Figure 12: SATA Hard Drive Top Bracket Screws
3. Using the star screwdriver (Item B in Figure 1) unscrew and remove the screws holding
the hard drive as shown in Figure 13.