VXL Instruments Itona TC61yy Series - Manual (Page 7)

3 Thin Client Bracket
2
Thin Client Bracket
Removing the thin client from the bracket
The procedure to remove the thin client from the bracket is explained in this section.
To remove the thin client from the bracket:
1. Turn off the power to the client.
2. Remove all the cables connected to the client.
3. Unscrew the thumbscrews provided at the top and bottom of the bracket as shown in
Figure 2.
Figure 2: Thin Client Bracket
4. Remove thin client out of the bracket as shown in Figure 3
Figure 3: Removing Thin Client Bracket