Denon AVR-3808CI - Manual (Page 46)

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers to
flat response.
Manual
: Apply frequency response set with “Manual
EQ”.
OFF
: Turn equalizer off.
d Room EQ
Select room equalizer for current environment.
[Selectable items]
Operating from the main unit or main remote
control unit
Press the ROOM EQ button on the main unit or the EQ button on the
main remote control.
Audyssey Audyssey Byp. L/R
Audyssey Flat Manual OFF
When “Audyssey” is selected, “ ” lights.
When “Audyssey Byp. L/R” or “Audyssey Flat” is selected, or when
the auto setup measuring results have changed, “
” lights.
• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after the auto setup procedure has been performed.
• If the settings of the speakers for which “None” has been determined
at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R” and
“Audyssey Flat” cannot be selected and measurements have to be
taken again to include the newly-added speakers.
• When using headphones, “Room EQ” is always set to “OFF”.
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the GUI menu and can be set when the input
source is set to “XM” or “NET/USB”, or when analog signals
(including AM/FM signals) or PCM signals (fs = 44.1/48 kHz) are
input.
[Selectable items]
f RESTORER
This function restores compressed audio signals to how
they were before compression and corrects the sense of
volume of the bass to obtain richer playback sound.
Operating from the main unit or main remote
control unit
During playback, press the RESTORER button on the main unit or the
RSTR button on the main remote control unit.
When set to something other than “OFF”, “
” is displayed.
OFF Mode 1
(RESTORER 64)
Mode 2
(RESTORER 96)
Mode 3
(RESTORER HQ)
–6dB ~ +6dB
–6dB ~ +6dB
Subwoofer Att.
Attenuate subwoofer level when using EXT. IN mode.
Set this to “ON” if the subwoofer channel level seems too high when
playing Super Audio CD.
Subwoofer
Turn subwoofer output on and off.
Default
Resets the settings to the default values.
Tone Defeat
Turn tone adjustments off.
The tone cannot be adjusted when in the DIRECT mode.
Bass
Adjust low frequency range (bass).
Treble
Adjust high frequency range (treble).
“Bass” and “Treble” can be set when “Tone Defeat” is set to “OFF”.
ON OFF [Selectable items]
ON OFF [Selectable items]
ON OFF [Selectable items]
[Variable range]
[Variable range]
s Tone
Adjust the tonal quality of the sound.
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
The default setting for “NET/USB” and “iPod” is “Mode3”. All others
are set to “OFF”.
OFF
Mode1
(RESTORER 64)
Mode2
(RESTORER 96)
Mode3
(RESTORER HQ)