Upsite 2040 Surface Mount XLarge Grommet - Manual (Page 2)

Designer & Manufacturer
(888) 982-7800 www.upsite.com
Installation Guide
Surface Mount Raised Floor Grommets
General Information
SAFETY REQUIREMENTS
Installers must be familiar with standard safety and risk management practices when working in raised-floor environ-
ments and when modifying floor tiles.
Effective Installation of Cables
In order to minimize any air loss from the rack hole selection, make sure to allow for adequate slack in the cables. If
the cables are under too much tension, the grommet may be pulled apart, resulting in a gap that will cause an increase
in the flow of air escaping through the rack.
Maintaining Proper Cooling of Equipment
Failure to follow computer manufacturer’s guidelines for maintaining proper cooling may result in the overheating of
equipment. Before sealing cable cutouts, ensure that there is adequate airflow to the intake sides of computer equip-
ment or cabinets through devices such as perforated floor tiles or grates. Achieving proper airflow to the intake side of
the computer equipment and/or cabinets is the responsibility of the customer.
Dimensions and Tile Cutting Requirements Inches (W x D x H) Millimeters (W x D x H)
Part No. 2020 Original - Overall size 11” x 8 1/4 ” x 1 1⁄8 ” 279 x 210 x 29mm
Product height above the raised floor 1 1⁄4 ” with mounting system installed 32mm
Maximum cutout size sealed 10” x 7 1/4 ” 254 x 184mm
Usable cable area 33 sq in 21336 sq mm
Part No. 2030 Large - Overall size 12” x 11 3/4 ” x 1 5⁄16 ” 305 x 298 x 33mm
Product height above the raised floor 1 7⁄16 ” with mounting system installed 37mm
Maximum cutout size sealed 10” x 9 3/4 ” 254 x 248mm
Usable cable area 33 sq in 21336 sq mm
Part No. 2040 XLarge - Overall size 12” x 15” x 1 5⁄16 ” 305 x 381 x 33mm
Product height above the raised floor 1 7⁄16 ” with mounting system installed 37mm
Maximum cutout size sealed 10” x 13” 254 x 330mm
Usable cable area 33 sq in 21336 sq mm
2