Triplett CamView PTZ – PN: 8000 User Manual
Page 38
Page 36
4. Specifications Cont.
RJ-45 CABLE TEST
Tests Performed
Tests 2 to 8 conductors for Opens, Shorts,
and Miswires.
Connections
Female RJ-45 on CamView, Female RJ-45
on Remote. Tested cable must have male
RJ-45 connectors on both ends.
Indications
Pin to pin connections displayed,
Opens and Shorts indicated with a red ‘X’.
PTZ data Capture and display
Test Performed
Captures and displays PTZ data from
sending device.
Connections
RS232: 9 pin D-sub (DB9)
RS422 and RS485: Alligator clips on
provided adaptor cable
Settings
Port selection and Baud rate
POWER
AC Adaptor/Charger
Input: 100 to 240VAC, 50/60Hz, 0.30A,
American Blade
Output: DC5V / 2A, 5.5mm x 2.1mm coaxial,
center positive
Battery
Built-in 3.7V Lithium polymer battery, 2000mAh
Charging Time
Approximately 4 hours for 90% charge (the
Charge
indicator LED turns off). Additional 1 hour for
full charge. Limit charging time to 8 hours for
best battery life.
Operating time on full
battery charge
Approximately 11 hours
Auto Power off
Selectable in 5 minute increments from 5 min to
60 min. Can be disabled.