Triplett Fox & Hound HotWire – PN: 3388 - Manual (Page 12)

A: ANTENNA
B: LED HEADLITES
C: SIGNAL STRENGTH INDICATOR
D: POWER BUTTON
E: VOLUME / SENSITIVITY CONTROL
F: EARPHONE JACK
G: BATTERY CONNECTOR
H: BATTERY STRAP
I: BATTERY COVER
J: 9V BATTERY
K: SPEAKER
Page 11
7: HotWire Hound Control Locations
A) Antenna
This area contains the RF sensing antenna. When using the HotWire Hound, this area is positioned for the
strongest signal pickup, or for finding the “null” (more on this later).
B) LED Headlights
Two white LED headlights help illuminate the immediate area.
Helpful Hint
The LED headlights can be used as a low battery indicator. Their brightness is regulated when the battery
is good, but as the battery is depleted, a point will be reached where the brightness of the LEDs will begin
to decrease. It is a good idea to consider replacing the battery at this time (or at least have a spare one on
hand). The HotWire Hound will continue to work for a while, but some reduction in sensitivity and loss of
loudness may be noticed. Replace the battery for maximum performance.