Triplett LazerTape 160 – PN: TLT-160 - Manual (Page 6)

5 6
LazerTape 160 Users Manual
2. Start-Up
Inserting/Replacing Batteries (See Figure A)
1) Remove battery cover (a small screwdriver is required)
2) Insert batteries, observing correct polarity.
3) Replace battery cover.
• Replace batteries when this symbol “ “ appears
permanently in the display.
• Use alkaline batteries only.
• Remove the batteries if the unit is unused for several weeks or
longer.
Keypad (See Figure B)
Figure A
1- ON/MEASURE button
2- Area/Volume button
3- Indirect measurement button
8- Reference button 1
9- Backlite/UNITS button 2 3
10- Clear/Off button
4
4- Single/Continuous, MAX/MIN measurement button
7
5- Plus ( ) button
8
6- Minus ( ) button
7- Memory button
6
9
10
Figure B