Triplett LazerTape 160 – PN: TLT-160 - Manual (Page 13)

LazerTape 160 Users Manual
Indirect Measurement - Determining a Distance Using 2 Measurements (See Figure G)
A height that cannot be measured directly can be calculated from 2 indirect measurements.
Press this button once, the display shows. The distance to be measured (1) flashes in the symbol.
Aim at the upper point (1) and trigger the measurement.
After measurement (1), move the LazerTape to point at the
base of the unknown height (establish a right angle).
Press to measure distance (2).
The 3 rd line with the display the calculated height.
1
2
Figure G
13