Triplett 9045 - Manual (Page 16)

16 Triplett Model 9045
is displayed when the REL (sometimes called Delta) mode is activated.
is displayed when the Diode Test mode is activated.
is displayed when the Continuity Beeper mode is activated.
is displayed when the Auto Power Off feature is activated.
Either C or F is displayed when the Temperature measurement mode is activated.
is displayed when the battery is low.
is displayed when a DC measurement mode is activated, i.e. DC Volts or Amps.
is displayed when an AC measurement mode is activated, i.e. AC Volts or Amps.
is displayed when the meter is in an Autoranging mode. This is the default mode
for the meter. When the user sets the meter to a manual range, the Auto annuncia-
tor is turned off.
A combination of these letters (or symbols) is used to indicate the units of mea-
surement being displayed by the meter. For example, “kHz” (kiloHertz) might be
displayed when measuring frequency, or “
Ω “ might be displayed when measur-
ing resistance.
A combination of these letters (or symbols) is used to indicate the units of mea-
surement being displayed by the meter. For example, “nF” might be displayed
when measuring capacitance, or “V” might be displayed when measuring voltage.