Using the battery – Directed Electronics TD850 User Manual
Page 28
USING THE BATTERY
If the power is switched on while the battery pack is
not fully charged, the player operation may
sometimes become unstable. Be sure to charge the
battery pack fully before using.
The battery pack is being recharged slowly while the
player is playing with AC/DC adapter connected.
The battery pack is being recharged as it is recharged
separately while the player is at STAND BY status
with AC/DC adapter connected.
After connecting the battery pack and power on,
press OSD button on remote control at PLAY
PAUSE or STOP status to show symbol
.
This symbol indicates the capability of the battery pack.
While the battery pack has lower capacity,
will be flashed to remind you.
、
"
"
"
"
AC POWER OPE RATION
Turn off the power of the player.
.
Turn the battery knob anti-clockwise to remove battery pack
1
Connect the DC output plug of the AC /DC
adapter to the DC IN jack on the player.
Connect the AC/DC adapter to a power
outlet.
Now the player can be operated.
Be sure to use the AC /DC adap ter
provided with the player.
Before inserting or removing the DC
output plug of the AC/DC adapter,
always be sure to turn off the power
of the portable DVD player.
CAUTIO N:
REMOVING THE BATTERY PACK FROM THE PLAYER
The battery pack can be removed from the player as described below.
25
-EN
PDF 文件使用 "pdfFactory Pro" 试用版本创建