Using the battery – Directed Electronics TD850 User Manual

Page 27

USING THE BATTERY

NOTES FOR RE CHARGING

When the battery pack is hot, it may take longer time than usual for recharging or may
sometimes be unable to be recharged. Wait for the battery pack to cool down before
retrying recharging.

If the recharge LED can not be lit, check whether the AC adapter and battery pack are
connected firmly to have perfect contact.

To protect the battery pack, do not recharge a fully charged battery pack repeatedly.
Repeated overcharging may deteriorate the battery performance.

The battery pack becomes hot after recharging, but this is not malfunction.

The battery pack may not be recharged fully if recharging at a hot place.
Do not recharge it under very hot environment, it may cause explosion.

The surrounding temperature during recharging affects the recharge efficiency.
Recharging is in the most efficient state from 10

to 30

. Recharge the batterypack

at a place within this temperature range whenever possible.

℃

ATTACHING THE BATTERY PACK TO THE PLAYER

Attach the battery pack to the player as described below.

Attach the battery pack to the unit.

Align the fix hole of the player

with the fix pole on the battery

pack. Turn the battery knob

clockwise until the battery pack

is tighten with the player.

Now the player can be operated.

If the battery pack is fully recharged, the
player can play DVDs continuously for
over 3 hours.

-EN

PDF 文件使用 "pdfFactory Pro" 试用版本创建